Question Set

1. The maximum permissible excentricity of load on a rectangular foundation with width B is equal to:





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->A rectangular plot 67 metres long is paved with 2546 tiles each measuring 50 square centimetre. Find the width of the plot ?....
QA->The length of a rectangular floor is 2 meters more than its width and its perimeter is 20 meters, then its area is....
QA->What is the maximum permissible period between two sessions of a State Legislative Assembly?....
QA->Five equal forces of 10 N each are applied at one point and all are lying in one plane. If angles between them are equal, the resultant of these forces wil be?....
QA->What is the permissible level of noise in a silent zone at daytime?....
MCQ->The maximum permissible excentricity of load on a rectangular foundation with width B is equal to:....
MCQ->Consider the following statements : In subsoil exploration programme the term "significant depth of exploration" is upto 1. the width of foundation 2. twice the width of foundation 3. the depth where the additional stress intensity is less than 20% of overburden pressure 4. the depth where the additional stress intensity is less than 10% of the overburden pressure 5. hard rock level. Of these statements :....
MCQ->Consider the following statements regarding a beam of uniform cross-section simply supported at its ends and carrying a concentrated load at one of its third points : 1. Its deflection under the load will be maximum. 2. The bending moment under the load will be maximum. 3. The deflection at the mid-point of the span will be maximum. 4. The slope at the nearer support will be maximum. Of these statements :....
MCQ->Consider the following statements pertaining to a pile group and a single pile at failure : 1. In loose and medium dense sands, the failure load per pile in a group will generally be greater than the failure load for a single pile. 2. In cohesive soils, the failure load per pile in a group will be greater than failure load for a single pile. 3. For piles driven in dense sands, the failure load per pile in a group is greater than the failure load for a single pile. 4. When the pile spacing is greater than 10 times the pile diameter, the failure loads per pile in a group and forly same in both sands and clays. Of these statements :....
MCQ->A voltage regulator with a no-load output dc voltage of 12 V is connected to a load with a resistance of 10 . If the load resistance decreases to 7.5 , the load voltage will decrease to 10.9 V. The load current will be ________, and the percent load regulation is ________.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution