Question Set

1. The stress distribution at a depth beneath a loaded area is determined using Newmark's influence chart which indicates an influence value of 0.005. The number of segments covered by the loaded area in the chart is 20 and the intensity of loading on the area is 10 T/m2. The intensity of stress distribution at that depth is





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The device used to measure the depth of oceans using sound waves?....
QA->By whom was the absolute value of charge on electron determined?....
QA->A high value of tan delta indicates....
QA->005 നെ ഏതു സംഖ്യകൊണ്ട് ഗുണിച്ചാല്‍ 50 കിട്ടും ?....
QA->Which gland is situated beneath the brain and whose over-secretion produces giants-size children?....
MCQ->The stress distribution at a depth beneath a loaded area is determined using Newmark's influence chart which indicates an influence value of 0.005. The number of segments covered by the loaded area in the chart is 20 and the intensity of loading on the area is 10 T/m2. The intensity of stress distribution at that depth is....
MCQ->A part of the Newmark's influence chart with four concentric circles is shown in the above figure. If the hatched areas 1 and 2 are loaded separately with the same intensity of loading, then the intensity of pressure yielded ....
MCQ->Consider the following statements : 1. In a member subjected to uniaxial tensile force the maximum normal stress is the external load divided by the maximum cross-sectional area. 2. When the structural member is subjected to uniaxial loading, the shear stress is zero on a plane where the normal stress is maximum. 3. In a member subjected to uniaxial loading, the normal stress on the planes of maximum shear stress is less than the maximum. Of these statements :....
MCQ->A column section as indicated in the given figure is loaded with a concentrated load at a point 'F' so as to produce maximum bending stress due to eccentricities about xx axis and yy axis as 5 t/m2 and 8 t/m2 respectively. If the direct stress due to loading is 15 t/m2 (compressive), then the intensity of resultant stress at the corner 'B' of the column section is ....
MCQ->Consider the following statements : In subsoil exploration programme the term "significant depth of exploration" is upto 1. the width of foundation 2. twice the width of foundation 3. the depth where the additional stress intensity is less than 20% of overburden pressure 4. the depth where the additional stress intensity is less than 10% of the overburden pressure 5. hard rock level. Of these statements :....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution