Question Set

1. What is known as the force per unit area required to penetrate into a soil mass with a circular plunger of 50 mm diameter at a rate of 25 mm/minute?





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The spatial frequency of a wave, either in cycles per unit distance or radians per unit distance is called?....
QA->Amount of heat required to raise the, temperature of unit mass of a substance by 1°C is known as?....
QA->The force per unit area is called?....
QA->The mass per unit volume of a substance is known as its?....
QA->The quantity of heat required to raise the temperature of unit mass of a substance by 1°C is called its?....
MCQ->What is known as the force per unit area required to penetrate into a soil mass with a circular plunger of 50 mm diameter at a rate of 25 mm/minute?....
MCQ->A hydraulic press has a ram of 10 cms in diameter and a plunger of 1 cm in diameter. The force required on the plunger to raise a weight of 10 tons on the ram is __________ kg.....
MCQ->A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids))....
MCQ->S1: A force of exists between everybody in the universe. P : Normally it is very small but when the one of the bodies is a planet, like earth, the force is considerable. Q : It has been investigated by many scientists including Galileo and Newton. R : Everything on or near the surface of the earth is attracted by the mass of earth. S : This gravitational force depends on the mass of the bodies involved. S6: The greater the mass, the greater is the earth's force of attraction on it. We can call this force of attraction gravity. The Proper sequence should be:....
MCQ->The firing mechanism of a pinball machine consists of a plunger P having a mass of 0.25 kg and a spring of stiffness k = 300 N/m. When s = 0, the spring is compressed 50 mm. If the arm is pulled back such that s = 100 mm and released, determine the speed of the 0.3 kg pinball B just before the plunger strikes the stop, i.e., s = 0. Assume all sufaces of contact to be smooth. The ball moves in the horizontal plane. Note that the ball slides without rolling.....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution