Question Set

1. In figure The minimum and maximum load currents are





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

  • By: guest on 01 Jun 2017 11.42 pm
    When RL = ∞, IL = 0, When RL = 100 Ω, or 120 mA.
Show Similar Question And Answers
QA->Which Place experiences minimum and maximum temperature?....
QA->The 'g' is maximum on Jupiter and minimum on the planet?....
QA->Sound produced at a point is heard by a person after 5 second, while the same sound is heard by another person after 6 seconds. If the speed of sound is 300 m/s, what could be the maximum and minimum distances between the two persons?....
QA->Which of the following are valid minimum and maximum zoom size in MS Word ?....
QA->The minimum age for the worker , to be employed in a factory, was fixed through the first Factory Act. What was the minimum age?....
MCQ->Consider the following statements pertaining to a pile group and a single pile at failure : 1. In loose and medium dense sands, the failure load per pile in a group will generally be greater than the failure load for a single pile. 2. In cohesive soils, the failure load per pile in a group will be greater than failure load for a single pile. 3. For piles driven in dense sands, the failure load per pile in a group is greater than the failure load for a single pile. 4. When the pile spacing is greater than 10 times the pile diameter, the failure loads per pile in a group and forly same in both sands and clays. Of these statements :....
MCQ->Consider the following statements regarding a beam of uniform cross-section simply supported at its ends and carrying a concentrated load at one of its third points : 1. Its deflection under the load will be maximum. 2. The bending moment under the load will be maximum. 3. The deflection at the mid-point of the span will be maximum. 4. The slope at the nearer support will be maximum. Of these statements :....
MCQ->A voltage regulator with a no-load output dc voltage of 12 V is connected to a load with a resistance of 10 . If the load resistance decreases to 7.5 , the load voltage will decrease to 10.9 V. The load current will be ________, and the percent load regulation is ________.....
MCQ->In figure The minimum and maximum load currents are ....
MCQ->Pick out thể one word for - a secret arrangement....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution