Question Set

1. The cross section of a JFET is shown in the following figure. Let Va be - 2 V and let Vp be the initial pinch-off voltage. If the width W is doubled (with other geometrical parameters and doping levels remaining the same), then the ratio between the mutual transconductances of the initial and the modified JFET is


Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->The ratio of bases of a cylinder and a cone are in the ratio 3: Volume of cylinder and cone are in the ratio 9: then their heights are in the ratio?....
QA->P can do a work in 24 days. Q can do the same work in 9 days and R can do the same in 12 days. Q and R start the work and leave after 3 days. P finishes the remaining work in --- days.....
QA->Two trains are 2 km apart and their lengths are 200 m and 300 m. They are approaching towards each other with a speed of 20 m/s and 30 m/s respectivety. after how much time they cross each other....
QA->If two bodies of different masses, initially at rest, are acted upon by the same force for the same time, then the both bodies acquire the same?....
QA->The electronic circuit which works only on two voltage levels (0 and 1) is called?....
MCQ->The cross section of a JFET is shown in the following figure. Let Va be - 2 V and let Vp be the initial pinch-off voltage. If the width W is doubled (with other geometrical parameters and doping levels remaining the same), then the ratio between the mutual transconductances of the initial and the modified JFET is ....
MCQ->The deflection at the free end of a cantilever of rectangular cross-section due to certain loading of 0.8 cm. If the depth of the section is doubled keeping the width the same, then the deflection at the free end due to the same loading will be....
MCQ->Breakdown voltage and pinch-off voltage of a JFET are different terms for the same voltage level.....
MCQ->The cut off voltage for JFET is 5 V. The pinch off voltage is __________ .....
MCQ->Consider a silicon p-n junction at room temperature having the following parameters: Doping on the n-side = 1 x 1017 cm-3 Depletion width on the n-side = 0.1 μm Depletion width on the p-side = 1.0 μm Intrinsic carrier concentration = 1.4 x 1014F. cm-1. Thermal voltage = 26mV Permittivity of free space = 8.85 x 10-14F. cm-1. Dielectric constant of silicon = 12. The peak electric field in the device is....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution