Question Set

1. If the operating temperature increases by 10°C, the rate of deterioration of solid dielectric becomes





Ask Your Doubts Here

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Show Similar Question And Answers
QA->Rs.800 becomes Rs.956 in 3 years at certain rate of simple interest.If the rate of interest is increased by 3%,What amount will Rs.800 becomes in 3 years?....
QA->Rate of evaporation increases with increase in temperature, surface area and decrease in?....
QA->If the absolute temperature of a perfectly black body id doubled, then its rate of radiation increases by a factor of?....
QA->On a cold day when a room temperature is 15oC, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15oC, because?....
QA->A​ ​white​ ​solid’A’on​ ​heating​ ​gives​ ​off​ ​a​ ​gas​ ​which​ ​turns​ ​lime​ ​water milky.The​ residue​ ​is​ ​yellow​ ​when​ ​hot​ ​but​ ​turns​ ​white​ ​on​ ​cooling​ ​.The solid​ ​A​ ​is:....
MCQ->If the operating temperature increases by 10°C, the rate of deterioration of solid dielectric becomes....
MCQ->In solid dielectrics the rate of deterioration doubles for every 10-12°C rise in temperature.....
MCQ->200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 x 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)....
MCQ->Consider the following statements: In a microstrip line Wavelength , where eff is the effective dielectric constant and 1 is the free space wavelength.Electromagnetic fields exist partly in the air above the dielectric substrate and partly within the substrate itself.The effective dielectric constant is greater than the dielectric constant of the air.Conductor losses increase with decreasing characteristic impedance. Which of the above statements is/are correct?....
MCQ->A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use | Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions
Question ANSWER With Solution